Electrochemical Characterization of Stainless Steel as a New Electrode Material in a Medical Device for the Diagnosis of Sudomotor Dysfunction

An electrochemical sensor detects the risk of diabetes and prediabetes; low potentials are applied to nickel electrodes and electrical responses are measured. Although the contact of nickel with skin is short, the risk of allergical reactions cannot be discarded. SS 304L, with lower Ni content, was tested in carbonate buffer solutions containing chloride, lactate and urea to investigate its sensitivity to different parameters in sweat and compare it to nickel. The results show that SS 304L is a suitable material for the assessment of sudomotor dysfunction due to its high capacity to detect the deviation in Cl^? concentration. Sensitivity of SS 304L to Cl^? is much higher than for nickel.     

Microstructure change in deuterium implanted CLAM steel induced by electron irradiation

As Reduced Activation Ferritic/Martensitic (RAFM) steel is considered the primary candidate for use as a structural material in fusion power reactors,many countries are developing different kinds of RAFM.China is developing new CLAM (China Low Activation Martensitic) steel.The study investigates microstructural changes in CLAM steel implanted with deuterium ions induced by 1250 keV electron irradiation from R.T.to 873 K,and observes both the growth and shrinkage of the defect clusters produced by deuterium ...     

Dislocation-density-based constitutive modelling of tensile flow and work-hardening behaviour of P92 steel

The flow and work-hardening behaviour of tempered martensitic P92 steel have been investigated using phenomenological constitutive model in the temperature range 300–873 K for the strain rates ranging from 3.16 × 10^?5 to 1.26 × 10^?3 s^?1. The analysis indicated that the hybrid model reduced to Estrin–Mecking (E–M) one-internal-variable model at intermediate and high temperatures. Further, the analysis also indicated that dislocation dense martensite lath/cell boundaries and precipitates together act as effective barriers to dislocation glide in P92 steel. The flow behaviour of the steel was adequately described by the E–M approach for the range of temperatures and strain rates examined. Three distinct temperature regimes have been obtained for the variations in work-hardening parameters with respect to temperature and strain rate. Signatures of dynamic strain ageing in terms of the anomalous variations in work-hardening parameters at intermediate temperatures and the dominance of dynamic recovery at high temperatures have been observed. The evaluation of activation energy suggested that deformation is controlled by the dominance of cross-slip of dislocations at room and intermediate temperatures, and climb of dislocations at high temperatures.     

Application of electromagnetic processing for development of high-performance sintered powder metal parts

Electromagnetic processing was used to study the effects of electro-magneto forming on the dimensional control and thermal stability of sintered powder metal (PM) parts. The investigation was carried out on sinter-hardened, low chromium-molybdenum bainitic steel. The results show an increase in the microhardness of about 14% for the electromagnetic processed parts compared to the as-sintered parts. This was attributed to the 2% increase in the density, 17% and 29% reduction in the volume fraction of porosity and width of the bainitic lath, respectively, due to the electromagnetic processing. Dimensional characterization was carried out using a vertically aligned push-rod dilatometer. After four thermal cycles of heating and cooling, at a controlled rate of 5 °C/min to 1000 °C, the electromagnetic processed parts exhibited reduced dimensional change of about 44% lower than for the as-sintered parts. This is significantly important for applications that demand high dimensional tolerance and performance, especially at elevated temperatures.     

利用手持技术探究加热过程中石棉网上表面的温度

利用手持技术实时精确测量加热中石棉网上表面不同位置的温度，采用独立样本t检验比较石棉网上表面无铁丝点和有铁丝点间的温度差异与温差差异，通过回归分析探究石棉网上表面温度与其主要影响因素间的关系。研究表明：同等条件下加热中的石棉网上表面无铁丝点与有铁丝点存在显著温度差异，而无铁丝点间的单位距离温差与有铁丝点间的单位距离温差无显著差异；石棉网升温阶段上表面温度与时间、位置的关系可拟合为二元一次线性方程，恒温阶段上表面温度与位置的关系可拟合为一元三次曲线方程；石棉网上表面温度从中心向边缘小幅递减，均匀分布，最大温差小于玻璃仪器的耐热骤变温差。研究结果为化学教育实践中科学使用石棉网以及化学实验教材的编写提供参考依据。     

Organometallic Molecular Wires with Thioacetylene Backbones,trans-{RS-(C≡C)n}2Ru(phosphine)4: High Conductance through Non-Aromatic Bridging Linkers

In this work, the design, synthesis, and single-molecule conductance of ethynyl- and butadiynyl-ruthenium molecular wires with thioether anchor groups [RS=n-C₆H₁₃S, p-tert-Bu−C₆H₄S), trans-{RS−(C≡C)_n}₂Ru(dppe)₂ (n=1 ( 1^R ), 2 ( 2^R ); dppe: 1,2-bis(diphenylphosphino)ethane) and trans-(n-C₆H₁₃S−C≡C)₂Ru{P(OMe)₃}₄ 3^hex ] are reported. Scanning tunneling microscope break-junction study has revealed conductance of the organometallic molecular wires with the thioacetylene backbones higher than that of the related organometallic wires having arylethynylruthenium linkages with the sulfur anchor groups, trans-{p-MeS−C₆H₄-(C≡C)_n}₂Ru(phosphine)₄ 4 ⁿ (n=1, 2) and trans-(Th−C≡C)₂Ru(phosphine)₄ 5 (Th=3-thienyl). It should be noted that the molecular junctions constructed from the butadiynyl wire 2^R , trans-{ Au −RS−(C≡C)₂}₂Ru(dppe)₂ ( Au : gold metal electrode), show conductance comparable to that of the covalently linked polyynyl wire with the similar molecular length, trans-{ Au −(C≡C)₃}₂Ru(dppe)₂ 6³ . The DFT non-equilibrium Green's function (NEGF) study supports the highly conducting nature of the thioacetylene molecular wires through HOMO orbitals.     

Dislocation density crystalline plasticity modeling of lath martensitic microstructures in steel alloys

A three-dimensional multiple-slip dislocation density-based crystalline formulation, specialized finite-element formulations and Voronoi tessellations adapted to martensitic orientations were used to investigate large strain inelastic deformation modes and dislocation density evolution in martensitic microstructures. The formulation is based on accounting for variant morphologies and orientations, retained austenite and initial dislocation densities that are uniquely inherent to martensitic microstructures. The effects of parent austenite orientation and retained austenite were also investigated for heterogeneous fcc/bcc crystalline structures. Furthermore, the formulation was used to investigate microstructures mapped directly from SEM/EBSD images of martensitic steel alloys. The analysis indicates that variant morphology and orientations have a direct effect on dislocation density accumulation and inelastic localization in martensitic microstructures, and that lath directions, orientations and arrangements are critical characteristics of high strength martensitic deformation and behavior.     

Wire metamaterial based on semiconductor matrices

In this Letter, we have presented a new approach for the fabrication of nanowire media (wire metamaterials) by electrochemical methods. A^IIIB^V porous matrices (a host medium) were prepared by anodic electrochemical etching of industrial substrates. The host medium has been filled via electrochemical deposition with a metal and by means of annealing process. We have shown that this technique can be used to fabricate a nanowire medium with unique parameters (such as aspect ratio, high electric permittivity and strong χ⁽³⁾ nonlinearity near the fundamental absorption edge of the host media). (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Influence of modification time and high frequency ultrasound irradiation on self-assembling of alkylphosphonic acids on stainless steel: Electrochemical and spectroscopic studies

Self-assembly of alkylphosphonic acids on stainless steel was investigated under different conditions. Four different alkylphosphonic acids exhibiting alkyl chain of various size were synthesized and studied: butylphosphonic acid (C4P), octylphosphonic acid (C8P), decylphosphonic acid (C10P), and hexadecylphosphonic acid (C16P). Electrochemistry experiments were extensively carried out in order to determine electrochemical surface blocking of adsorbed layers in function of grafting time. In term of surface blocking, an 8 h modification time was optimal for all alkylphosphonic acids. Longer immersion times lead to degradation of adsorbed layers. For the first time, grafting of C16P was studied under high frequency ultrasound irradiation. Interestingly, grafting process is highly accelerated under sonication and well-covering C16P modified substrates are obtained after 1 h of immersion under ultrasound irradiation. This would allow to elaborate high-quality alkylphosphonic acids modified samples within much shorter times. Water contact angles measurements and X-ray Photoelectrons Spectroscopy (XPS) confirmed presence of adsorbed alkylphosphonic acids on stainless steel surface. A very tight link between electrochemical blocking, surface hydrophobicity and species chemical grafting was established.     

Investigation on Semi-conductive Properties of Hot Growth Film on 316L Austenitic Stainless Steel

The semi-conductive performances of hot growth film on 316L stainless steel were studied by means of electrochemical impedance spectroscopy(EIS) and Mott-Schottky analysis.The chemical compositions of the hot growth films were detected by X-ray photoelectron spectroscopy(XPS).The results show that the transfer resistance and film resistance increase with increasing temperature to 400℃,then they decrease sharply with further continuously increasing temperature.Formation time plays an important role in determ...